5-Star Google Rated
Certified Stone, Masonry & Tile Technicians
Licensed & Insured
Worn, Yellowed Floors Are a Finish Problem, Not a Cleaning Problem
Vinyl composition tile, commonly known as VCT, is built to hold up under heavy daily traffic, which is why it's so common in offices, retail spaces, schools, medical buildings, and plenty of homes as well. But VCT depends entirely on its protective wax finish to keep its shine and resist scuffing, staining, and wear. Once that finish starts breaking down, no amount of mopping or spot cleaning brings the shine back. What looks like a dirty floor is usually a finish that has worn through in high traffic areas, leaving dull patches, visible scuffing, and a yellowed, cloudy cast where layers of old wax have built up over time.
If your VCT floor looks consistently dingy no matter how often it's mopped, or if you can see a clear traffic pattern worn into the shine, that's a sign the finish itself needs to be addressed, not just the surface.
What VCT Strip and Wax Actually Involves
Stripping and waxing a VCT floor means fully removing the old wax, dirt, and other contaminants from the surface, then applying several new layers of wax to protect and restore its appearance. The process includes several distinct steps.
Sweeping. Loose dirt and debris are cleared from the floor before any wet work begins.
Scrubbing. A deep clean removes embedded dirt and breaks down old wax layers.
Rinsing. The floor is rinsed thoroughly to remove all cleaning agents and residue left behind from the stripping process.
Drying. The floor is allowed to dry completely before any new wax goes down, since trapping moisture under a fresh coat leads to a poor finish.
Waxing. Multiple layers of wax are applied by mop or machine to build a glossy, protective finish.
Depending on the size and condition of the floor, this process can take several hours, and it requires professional grade equipment and products to get a consistent, even result.
Recoating vs. a Full Strip and Wax
Old Wax Buildup
Recoating Over Existing Finish: Remains underneath, continues yellowing over time Full Strip and Wax: Fully removed before new wax is applied
Evenness of Results
Recoating Over Existing Finish: Uneven, traffic patterns often still visible Full Strip and Wax: Consistent, even shine across the entire floor
How Long Results Last
Recoating Over Existing Finish: Shorter, since new wax sits on a compromised base Full Strip and Wax: Longer, since wax is applied to a properly prepared surface
Best Used When
Recoating Over Existing Finish: Finish is still in reasonably good condition Full Strip and Wax: Finish has yellowed, dulled, or worn through in traffic areas
6+
1000's
100+
YEARS RESTORING HENDERSON FLOORS
FLOORS BROUGHT BACK TO LIFE
GROUT COLOR MATCHES
Benefits of Professional Strip and Wax
Enhanced appearance. Restores the original shine and beauty of your vinyl flooring rather than masking wear with another layer on top.
Protection. Adds a fresh protective barrier that helps prevent everyday wear and tear from reaching the tile itself.
Durability. Extends the useful life of your flooring by properly protecting it, rather than letting a compromised finish continue to break down.
Improved hygiene. Removes dirt, grime, and contaminants trapped in old wax layers, supporting a genuinely cleaner surface, not just a shinier looking one.
How Often Should VCT Be Stripped and Waxed
Well maintained VCT flooring generally benefits from a strip and wax service every three to four months to preserve the floor and keep it looking its best, especially in higher traffic commercial spaces. We use a high quality wax with a high percentage of solids, which creates a longer lasting, more brilliant shine and a genuinely like new appearance. That combination means your VCT floor stays looking newer for longer, and the flooring itself lasts longer as a result of proper, regular maintenance rather than infrequent, reactive cleaning.
Why This Matters in the Las Vegas & Henderson
Between constant foot traffic in commercial spaces and the desert dust that works its way onto floors throughout the valley, VCT finish here tends to wear faster than it might in a lower traffic or less dusty environment. Recoating on top of that wear only masks the problem temporarily. A full strip and wax addresses what's actually happening to the finish, on a schedule that matches how quickly Las Vegas conditions actually wear it down.
What's Included
Certified Technicians
Our Lead Technicians are Certified in Stone, Masonry, and Tile
Full Evaluation
Assessment of your VCT floor's current finish condition
Sweeping & Scrubbing
Sweeping and deep scrubbing to remove embedded dirt and break down old wax
Complete Rinse
Thorough rinsing to remove all cleaning agents and residue
Dry Time
Complete dry time before any new product is applied
Waxing
Multiple coats of high solids wax for a durable, glossy finish
Satisfaction Guarantee
We return and make it right at no additional cost
FAQ- Facility Managers & Business Owners
Serving Residential and Commercial Properties Throughout Las Vegas & Henderson
-
Offices, retail spaces, and medical buildings
-
Schools and other institutional facilities
-
Residential VCT flooring in laundry rooms, basements, and utility spaces
-
Henderson, Las Vegas, Summerlin, and surrounding communities
Common Questions Homeowners Ask
Noticing dull, yellowed patches on your VCT floor that mopping never fixes?
Call Elite Tile and Grout Cleaning to schedule your VCT strip and wax service.
Certified Las Vegas stone, tile and floor restoration specialist
Se Habla Espanol
Phone: (725) 302-6025
Service Area: Las Vegas, Nevada
Hours: Mon-Sat, 8:00 AM - 5:00 PM, free estimates by appointment